Blog

Nylon coated steel reinforced rack which is supplied in 1 metre lengths.. The circular pinion drive gear of the motor engages teeth on the rack which is bolted to the gate, this causes the gate to open and shut. Rotational motion applied to the pinion will cause the rack (and therefore gate) to move toRead more

Our specially designed side support rollers for cantilever gates.Designed with bearings & stainless steel spacers to allow ease of movement. These durable rollers are used to support the side-ways movement of the gate.

The only spiral lock designed specifically for sliding gates. Installed on the closing post and is operated by a key and/or 12-24v Lock output from gate operator Rotating spike deadbolt with highly collision-proof electric release system, protected by case-hardened and galvanised steel rotating rings resistant to attack Tolerates gate heat expansion of± 10mm up toRead more

Nylon coated steel reinforced rack which is supplied in 1 metre lengths.. The circular pinion drive gear of the motor engages teeth on the rack which is bolted to the gate, this causes the gate to open and shut. Rotational motion applied to the pinion will cause the rack (and therefore gate) to move toRead more

Wheels which are fitted to the bottom of most domestic gates. These roll on the ‘concrete in’ or the ‘bolt down’ track, they are normally cut into the bottom of the frame and are bolted on by two mounting points, they can support a max load of 300 kg. Other sizes and load capacities areRead more

Roller wheels attached to the gate support post. These support the gate at the top and support it vertically. No load is applied to these besides side loading holding the gate vertical. Made of nylon, they are durable and minimise damaging the surface they are rolling on, particularly powder-coated surfaces. Picture for illustration purposes, colourRead more

Gate hinges which are suitable for gates up to 3m leaf, provides very easy adjustment at any time after the gates have been installed.

A Gate Stop for swing gates, which bolts down.

Cantilever Back Rail Roller Kit (Low Rider) for cantilever kit up to 8 metre Footing details and Installation Instructions are available on purchase of kit. Please note High Rider kits are available on request.

Cantilever Back Rail Kit (Low Rider) for gates over 8m with 200×100 back rail. Footing Details and Installation Instructions available on purchase of Cantilever Kit. Please note High Rider kits are available on request.